The usage method of electronic jacquard faucet machine

The usage method of electronic jacquard faucet machine may vary depending on the specific model and brand, but generally speaking, its usage steps and precautions are as follows:

1、 Preparation before startup

Check the machine: Ensure that the electronic jacquard faucet machine is in good working condition, check whether all components are intact and whether the wire connections are firm.

Installation pattern: According to production needs, import the designed pattern file into the control system of the electronic jacquard faucet machine. This usually involves saving the pattern file on a USB flash drive or other storage device and inserting it into the machine's interface.

2、 Startup and Settings

Power on: Insert the power cord of the electronic jacquard faucet machine into the power socket and turn on the power switch.

Start the machine: Press the start button to put the machine into operation. At this point, the operation of the machine should be observed to ensure that there are no abnormal noises or vibrations.

Set parameters: According to production requirements, set the operating parameters of the machine, such as weft density, speed, etc. The setting of these parameters is usually done through the machine's control panel.

3、 Production operation

Monitoring operation: During the production process, close attention should be paid to the operation of the machine to ensure that no faults such as yarn breakage, warp stop, or weft stop occur.

Fault handling: Once a fault occurs, the machine should be stopped immediately and the cause of the fault should be checked. Take corresponding measures to troubleshoot according to the prompts of the fault indicator light. For example, if the fault indicator light of the weft storage device lights up, check whether the yarn between the weft storage device and the bobbin yarn is broken, or whether the weft storage device is wound.

Replacing weft yarn: When the weft yarn is used up or broken, it should be replaced in a timely manner. When replacing the weft yarn, it should be ensured that the tension of the weft yarn is appropriate to avoid affecting the quality of the fabric.

4、 Shutdown and maintenance

Shutdown: After production is completed, the shutdown button should be pressed to stop the machine from running. Then disconnect the power switch to ensure that the machine is in a safe state.

Cleaning and maintenance: Regularly clean and maintain the electronic jacquard faucet machine, including removing dust, oil stains, and other debris from the machine, checking and lubricating the operation of each component. This helps to extend the service life of the machine and improve production efficiency.

5、 Precautions

Safety first: When operating the electronic jacquard faucet machine, safety operating procedures should be strictly followed to ensure the safety of personnel and equipment.

Professional operation: It is recommended to have professional personnel perform operation and maintenance to ensure the normal operation of the machine and the quality of the fabric.

Regular inspection: Regularly inspect and maintain the machine, promptly identify and address potential issues to avoid malfunctions and losses during production.

In summary, the usage of electronic jacquard faucet machines involves multiple aspects, including preparation before startup, startup and setup, production operation, shutdown and maintenance, as well as precautions. During use, it is important to closely monitor the operation of the machine, promptly address any malfunctions, and regularly clean and maintain the machine to ensure smooth production and fabric quality.